Can’t hear SiriusXM content and / or missing 360L features?
Try these troubleshooting steps:
Step 1- Check for Satellite connection. Try to tune to channel 8 to confirm you are receiving a satellite signal and the radio is active.
-if receiving channel 8- then you have an active satellite connection. Go to Step 2.
-If NOT receiving channel 8- your radio may simply need a refresh signal. Have the Radio ID or VIN handy, then send a refresh signal. Once received, go to Step 2.
-If the refresh is unsuccessful, check to be sure you have an active demo or paid plan.
Step 2- Check for 360L Streaming connection. Try to tune to channel 703 to confirm you are receiving a streaming signal and the radio is active.
-If receiving channel 703- then you have an active 360L connection and are ready to go.
-If NOT receiving channel 703-
1. Confirm whether the vehicle has a good cellular connection. Move the vehicle to a new location and check for channel 703 again.If this does not restore streaming connectivity, proceed to the next step.
2. Power cycle your radio. Turn the ignition off, open and close the driver's door, and wait a full 5 minutes for the vehicle to shut completely off. Every vehicle is different, so it may take some vehicles longer than others to completely power down. After 5 minutes, turn the vehicle back on. If the power cycle is unsuccessful, proceed to the next step.
3. Put the radio in Deep Sleep. Repeat step B, but allow your vehicle to completely power down without interaction for at least an hour. If the above steps were unsuccessful, please call us at 866-635-0179